11×12 Bedroom Layouts: Room for a King, Desk and Dresser
Short answer
King, desk and dresser An 11×12 bedroom is the smallest size we tested where a king, a 48″ desk and a dresser all fit with both sides of the bed open: two layouts, 26″ beside the bed. A queen gets three layouts with 34″ on each side, and still fits a desk with a 60″ six-drawer dresser.
26″
each side of a king, centered
34″
each side of a queen, centered
132
square feet
An 11×12 bedroom has two 11-foot walls (132″) and two 12-foot walls (144″): 132 square feet. It’s one foot wider than a 10×12, and that foot is exactly what a king needs: centered on the 11-foot wall, a king frame leaves 132 − 80 = 52″, or 26″ per side, where a 10×12 leaves 20″.
So we didn’t guess. Every layout on this page was solved by the same planning engine that runs our Bedroom Solver. It places the furniture, then checks the space beside and below the bed, room to pull out a desk chair and open drawers, the door swing, and a clear walking route from the door to everything. We ran more than 150 combinations of bed size, furniture, clearance setting, door and closet position. Here’s what holds up.
Contents
What fits in an 11×12 bedroom
With 24″ walkways and both sides of the bed open, here’s every common bed size alone and with furniture, plus what changes with one side against a wall or with roomier 30″ paths.
| Bed (frame) | Bed only | + dresser | + desk + dresser | One side to a wall | With 30″ paths |
|---|---|---|---|---|---|
| Twin 42×79 | Fits | Fits | Fits | Everything | Everything |
| Full 58×79 | Fits | Fits | Fits | Everything | Everything |
| Queen 64×84 | Fits | Fits | Fits | Everything | Bed + dresser |
| King 80×84 | Fits | Fits | Fits | Everything | Bed only |
Your frame is a different size? Change the numbers here and the verdict updates:
Fit check
Try your room’s real size
Centered on the wall, you can walk around both sides and past the foot.
- each side
- 26″
- at the foot
- 60″
Assumes a frame about 4″ larger than the mattress, with the headboard on the first wall. We use 24″ beside the bed and 30″ at the foot as minimums.
Three layouts that work in an 11×12
The room: a 30″ door near one corner of a 12-foot wall, swinging in, and a 48″ window on the opposite 12-foot wall. All three layouts pass every check at our standard setting.
In the plans, green hatching is space that has to stay clear, the dashed arc is the door swing, and the pale bar on the right wall is the window. The grid is 1 foot.
Layout A: Queen, desk and dresser
All checks pass
- 34″ on each side of the bed
- 34″ at the foot of the bed
- 34″ to pull out the desk chair
- 40″ in front of the dresser
Best for: couples who want two real nightstands: up to 34″ wide on each side.
The trade-off: the desk chair pulls out into the path at the foot of the bed, the same squeeze as in a 10×12.
Layout B: King, desk and dresser
All checks pass
- 26″ on each side of the bed
- 34″ at the foot of the bed
- 34″ to pull out the desk chair
- 40″ in front of the dresser
Best for: couples who want a king without giving up a workspace.
The trade-off: only two layouts pass, both with the headboard on an 11-foot wall, and the sides get 26″: room for slim nightstands, not wide ones.
Layout C: Queen with a 60″ dresser and a desk
All checks pass
- 34″ on each side of the bed
- 34″ at the foot of the bed
- 34″ to pull out the desk chair
- 40″ in front of the dresser
Best for: a primary bedroom that needs serious drawer space.
The trade-off: the dresser and desk fill the whole wall opposite the bed. In a 10×12, the same pair doesn’t fit next to a queen.
Try it on your room
Different door or window? Set the Bedroom Solver to 11×12 and move them; it redraws the layouts and checks every clearance. Open the Bedroom Solver →
Want roomier 30-inch paths?
24″ is a workable minimum, not a generous one. 30″ is also the width the ADA standards use for the clear floor space beside a bed in accessible hotel rooms. At 30″ paths:
- A queen keeps a dresser but not a desk: 34″ on each side, 40″ at the foot.
- A full keeps a desk and a dresser: 37″ on each side, 39″ at the foot, 39″ for the desk chair.
- A king fits only on its own, in one layout.
What changes the answer: door and closet
- The door. For a queen, desk and dresser, three layouts pass wherever the door is. For a king, desk and dresser, a door in the middle of a 12-foot wall leaves no layout; in the middle of an 11-foot wall, three pass.
- The closet. A 48″ reach-in closet on an 11-foot wall changes more: a queen or king fits with a dresser (three layouts and one), but no bed size fits with a desk and a dresser except a twin.
The clearances we checked
These are the numbers behind every verdict on this page. The first is our standard setting; the second is the roomier one.
24″ · 30″
Beside and at the foot of the bed
30″ · 36″
To pull out a desk chair
34″ · 40″
In front of a dresser
full arc
Door swing, kept clear
24″ · 30″
Walking route from the door
The dresser number is a 16″ drawer pulled all the way out plus room to stand in front of it. The walking route is checked on a grid, so a layout fails if any piece of furniture can only be reached by squeezing.
Measure this first
- Wall to wall in two places: rooms are rarely perfectly square.
- Door width, and which way the door swings.
- Where the closet is, and how its doors open.
- Window sill height, and any radiator or heater below it.
- Your bed frame’s outside size, not just the mattress.
Questions people ask
Can a king bed fit in an 11×12 bedroom?
Yes, with a desk and a dresser too: two layouts, with 26″ on each side and 34″ at the foot. On its own, a king gets three layouts.
What size bedroom do you need for a king, desk and dresser?
Of the sizes we tested, 11×12 is the smallest that fits all three with both sides of the bed open. In a 10×12, one side of the king has to go against the wall.
Is 11×12 a good size for a primary bedroom?
Yes. At 132 square feet it fits a queen with a 60″ dresser and a desk, or a king with a standard dresser and desk.
Where should the bed go in an 11×12 bedroom?
Centered on an 11-foot wall, with the desk and dresser on the opposite wall. Both king, desk and dresser layouts the solver found use that arrangement.
Try your exact 11×12
Open the Bedroom Solver, set the room to 11×12, then move the door, add a closet or swap the bed. It redraws the layouts and checks every clearance.
Related: 10×12 bedroom layouts · 12×12 bedroom layouts · 11×11 bedroom layouts · Layout Library
Sources
- ADA Standards, 806.2.3 Sleeping areas and 305.3 Clear floor space (U.S. Access Board)
- Minimum dimensions in the IRC (Fine Homebuilding)
- IRC R310 emergency escape openings (Linn County, Iowa)
- Standard door width and height (Milgard)
- Mattress sizes and dimensions (Amerisleep)
- Dresser dimensions (Wayfair)