11×11 Bedroom Layouts: Why a Square Room Is Trickier Than It Looks
Short answer
Queen + dresser An 11×11 bedroom fits a queen with a dresser, with 34″ on each side, or a king on its own. What it can’t do is a queen, a 48″ desk and a dresser with both sides open, even though a 10×12 room, one square foot smaller, fits all three. Push the queen to one side, or switch to a full with a smaller desk and chest.
34″
each side of a queen, centered
0
queen + desk + dresser layouts with both sides open
121
square feet
An 11×11 bedroom is 132″ square: 121 square feet. Square rooms look generous, but a bed is a rectangle, and the room’s shape decides where the leftover floor ends up. Here it ends up split into strips that are too narrow for a desk.
So we didn’t guess. Every layout on this page was solved by the same planning engine that runs our Bedroom Solver. It places the furniture, then checks the space beside and below the bed, room to pull out a desk chair and open drawers, the door swing, and a clear walking route from the door to everything. We ran more than 150 combinations of bed size, furniture, clearance setting, door and closet position. Here’s what holds up.
Contents
- 1 What fits in an 11×11 bedroom
- 2 Why the desk doesn’t fit with a queen
- 3 Three layouts that work in an 11×11
- 4 A full bed: desk or dresser, or both if they’re small
- 5 Can a king fit in an 11×11 bedroom?
- 6 What changes the answer: door, closet and roomier paths
- 7 The clearances we checked
- 8 Questions people ask
What fits in an 11×11 bedroom
With 24″ walkways and both sides of the bed open, here’s every common bed size alone and with furniture, plus what changes with one side against a wall or with roomier 30″ paths.
| Bed (frame) | Bed only | + dresser | + desk + dresser | One side to a wall | With 30″ paths |
|---|---|---|---|---|---|
| Twin 42×79 | Fits | Fits | Fits | Everything | Bed + dresser |
| Full 58×79 | Fits | Fits | No | Everything | Bed + dresser |
| Queen 64×84 | Fits | Fits | No | Everything | Bed only |
| King 80×84 | Fits | No | No | Bed + dresser | No |
Your frame is a different size? Change the numbers here and the verdict updates:
Fit check
Try your room’s real size
Centered on the wall, you can walk around both sides and past the foot.
- each side
- 34″
- at the foot
- 48″
Assumes a frame about 4″ larger than the mattress, with the headboard on the first wall. We use 24″ beside the bed and 30″ at the foot as minimums.
Why the desk doesn’t fit with a queen
Center a queen on any wall and the arithmetic is the same:
- Past the foot: 132 − 84 = 48″. A 24″-deep desk leaves 24″ for its chair, and a chair needs 30″.
- Beside the bed: (132 − 64) ÷ 2 = 34″ per side. A desk plus a walkway needs 24 + 24 = 48″.
In a 10×12, the queen sits on the 10-foot wall and gets 144 − 84 = 60″ past its foot: 24″ of desk and 36″ for the chair. The extra length matters more than the extra width.
Three layouts that work in an 11×11
The room: a 30″ door near one corner, swinging in, and a 48″ window on the opposite wall. All three layouts pass the checks at our standard setting; the third accepts one side of the bed against the wall.
In the plans, green hatching is space that has to stay clear, the dashed arc is the door swing, and the pale bar on the right wall is the window. The grid is 1 foot.
Layout A: Queen centered, dresser in the corner
All checks pass
- 34″ on each side of the bed
- 47″ at the foot of the bed
- Open floor in front of the dresser
Best for: couples. Both sides have room for a nightstand up to 34″ wide, and the foot has a generous path.
The trade-off: no desk. The 47″ at the foot is open floor, not workspace.
Layout B: Queen and a small desk
All checks pass
- 24″ and 44″ beside the bed
- 47″ at the foot of the bed
- Open floor to pull out the desk chair
Best for: a bedroom that needs a laptop spot more than drawers.
The trade-off: the desk is 40×20″, smaller than the 48×24″ standard, and there’s no dresser; a 30″ chest and the small desk together don’t fit.
Layout C: Queen, desk and dresser, one side closed
One side to the wall
- 31″ on the open side of the bed
- 47″ at the foot of the bed
- 31″ to pull out the desk chair
- 45″ in front of the dresser
Best for: one sleeper who wants every piece at full size.
The trade-off: the solver leaves 12″ on the wall side, marked red in the plan: too narrow to use. Push the bed all the way to the wall and the open side grows to 42″.
Try it on your room
Different door or window? Set the Bedroom Solver to 11×11 and move them; it redraws the layouts and checks every clearance. Open the Bedroom Solver →
A full bed: desk or dresser, or both if they’re small
A full fits with a 48″ desk (three layouts) or a 32″ dresser (three layouts), but not both with both sides open. Swap in a 40×20″ desk and a 30×16″ chest and all three fit, with 37″ on each side of the bed, 31″ for the desk chair and 35″ in front of the chest.
Can a king fit in an 11×11 bedroom?
On its own, yes: 132 − 80 = 52″ leaves 26″ on each side, and 47″ at the foot. Add a dresser and both sides can’t stay open; with one side treated as closed, a king and a dresser fit in three layouts.
What changes the answer: door, closet and roomier paths
- The door. For a queen and a dresser, the door’s position didn’t matter: three layouts at the corner or middle of any wall. For a queen, desk and dresser, no position helped.
- The closet. A 48″ reach-in closet on one wall leaves one queen-and-dresser layout and two for a full and a dresser. A queen or a king still fits on its own.
- Roomier paths. At 30″ walkways, a queen fits on its own, and a full or a twin with a dresser.
The clearances we checked
These are the numbers behind every verdict on this page. The first is our standard setting; the second is the roomier one.
24″ · 30″
Beside and at the foot of the bed
30″ · 36″
To pull out a desk chair
34″ · 40″
In front of a dresser
full arc
Door swing, kept clear
24″ · 30″
Walking route from the door
The dresser number is a 16″ drawer pulled all the way out plus room to stand in front of it. The walking route is checked on a grid, so a layout fails if any piece of furniture can only be reached by squeezing.
Measure this first
- Wall to wall in two places: rooms are rarely perfectly square.
- Door width, and which way the door swings.
- Where the closet is, and how its doors open.
- Window sill height, and any radiator or heater below it.
- Your bed frame’s outside size, not just the mattress.
Questions people ask
Is an 11×11 room bigger than a 10×12?
By one square foot: 121 versus 120. But a 10×12 fits a queen, a desk and a dresser with both sides open, and an 11×11 doesn’t. The extra length in a 10×12 lands where the desk chair needs it.
Will a queen bed and a dresser fit in an 11×11 room?
Yes, in three layouts, with 34″ on each side of the bed when it’s centered.
Can a king fit in an 11×11 bedroom?
On its own, with 26″ on each side and 47″ at the foot. With a dresser, one side has to be treated as closed.
Where should the bed go in a square bedroom?
Centered on a wall, with the dresser in a corner past its foot (Layout A). In this room, the door’s position didn’t change what fits for a queen and a dresser.
Try your exact 11×11
Open the Bedroom Solver, set the room to 11×11, then move the door, add a closet or swap the bed. It redraws the layouts and checks every clearance.
Related: 10×12 bedroom layouts · 11×12 bedroom layouts · 10×11 bedroom layouts · Layout Library
Sources
- ADA Standards, 806.2.3 Sleeping areas and 305.3 Clear floor space (U.S. Access Board)
- Minimum dimensions in the IRC (Fine Homebuilding)
- IRC R310 emergency escape openings (Linn County, Iowa)
- Standard door width and height (Milgard)
- Mattress sizes and dimensions (Amerisleep)
- Dresser dimensions (Wayfair)
- Key measurements for a home office (Houzz)