10×11 Bedroom Layouts: Queen, Full and Twin Plans That Work
Short answer
Queen + dresser A 10×11 bedroom fits a queen with a dresser, in one layout, with 24″ walkways and both sides open. A twin takes a 48″ desk and a dresser in three layouts, and a full takes a small desk and a chest. For a queen with a desk too, push one side against the wall. A king fits only on its own.
44″
on the open side of the queen, with a dresser
3
twin + desk + dresser layouts
110
square feet
A 10×11 bedroom has two 10-foot walls (120″) and two 11-foot walls (132″): 110 square feet. One foot more than a 10×10 doesn’t sound like much, but it lands where a bed needs it. A queen centered on a 10-foot wall now has 132 − 84 = 48″ past its foot instead of 36″.
So we didn’t guess. Every layout on this page was solved by the same planning engine that runs our Bedroom Solver. It places the furniture, then checks the space beside and below the bed, room to pull out a desk chair and open drawers, the door swing, and a clear walking route from the door to everything. We ran more than 150 combinations of bed size, furniture, clearance setting, door and closet position. Here’s what holds up.
Contents
What fits in a 10×11 bedroom
With 24″ walkways and both sides of the bed open, here’s every common bed size alone and with furniture, plus what changes with one side against a wall or with roomier 30″ paths.
| Bed (frame) | Bed only | + dresser | + desk + dresser | One side to a wall | With 30″ paths |
|---|---|---|---|---|---|
| Twin 42×79 | Fits | Fits | Fits | Everything | Bed + dresser |
| Full 58×79 | Fits | Fits | No | Everything | Bed only |
| Queen 64×84 | Fits | Fits | No | Everything | Bed only |
| King 80×84 | Fits | No | No | Bed + dresser | No |
Your frame is a different size? Change the numbers here and the verdict updates:
Fit check
Try your room’s real size
Centered on the wall, you can walk around both sides and past the foot.
- each side
- 28″
- at the foot
- 48″
Assumes a frame about 4″ larger than the mattress, with the headboard on the first wall. We use 24″ beside the bed and 30″ at the foot as minimums.
Three layouts that work in a 10×11
The room: a 30″ door near one corner of an 11-foot wall, swinging in, and a 48″ window on the opposite 11-foot wall. All three layouts pass every check at our standard setting.
In the plans, green hatching is space that has to stay clear, the dashed arc is the door swing, and the pale bar on the right wall is the window. The grid is 1 foot.
Layout A: Queen and a dresser
Only one layout
- 24″ and 44″ beside the bed
- 35″ at the foot of the bed
- Open floor in front of the dresser
- Door swing and walking route clear
Best for: a couple who wants a queen and real drawer space.
The trade-off: it’s the only arrangement that passes. The headboard shares the wall with the door, and one side of the bed gets exactly the 24″ minimum.
Layout B: Twin, desk and dresser
All checks pass
- 24″ and 35″ beside the bed
- 52″ at the foot of the bed
- Open floor in front of the desk
- 35″ in front of the dresser
Best for: a kid’s room or a student room that needs every piece.
The trade-off: the twin’s narrow side gets the 24″ minimum, and you stand at the dresser in the path along the other side. The open floor sits at the foot of the bed.
Layout C: Full, small desk and chest
All checks pass
- 31″ on each side of the bed
- 31″ at the foot of the bed
- 31″ to pull out the desk chair
- 35″ in front of the chest
Best for: one person who wants a bigger bed and both sides open.
The trade-off: the furniture is smaller than standard: a 40×20″ desk and a 30×16″ chest. With a full-size desk and dresser, a full fits only with one side to the wall.
Try it on your room
Different door or window? Set the Bedroom Solver to 10×11 and move them; it redraws the layouts and checks every clearance. Open the Bedroom Solver →
A queen with a desk: one side to the wall
With both sides of a queen open, no layout passes with a desk, even a 40×20″ one. Push the queen into a corner and the desk and dresser both fit, in three layouts. In the one below, the open side gets 30″, the foot 47″, the desk chair 30″ and the dresser 45″.
Can a king fit in a 10×11 bedroom?
On its own, in one layout: headboard on the window wall, 26″ on each side and 35″ at the foot. Add anything and both sides can’t stay open. With one side against the wall, a king takes a dresser (three layouts) but not a desk.
What changes the answer: door, closet and roomier paths
- The door. For a queen and a dresser, a door in the middle of a 10-foot wall gives two layouts instead of one. At a corner or the middle of an 11-foot wall, one passes.
- The closet. A 48″ reach-in closet on a 10-foot wall takes the queen-and-dresser layout away: the queen still fits on its own (three layouts). A twin and a dresser still fit too.
- Roomier paths. At 30″ walkways, a queen fits on its own (two layouts), a full on its own, and a twin with a dresser.
The clearances we checked
These are the numbers behind every verdict on this page. The first is our standard setting; the second is the roomier one.
24″ · 30″
Beside and at the foot of the bed
30″ · 36″
To pull out a desk chair
34″ · 40″
In front of a dresser
full arc
Door swing, kept clear
24″ · 30″
Walking route from the door
The dresser number is a 16″ drawer pulled all the way out plus room to stand in front of it. The walking route is checked on a grid, so a layout fails if any piece of furniture can only be reached by squeezing.
Measure this first
- Wall to wall in two places: rooms are rarely perfectly square.
- Door width, and which way the door swings.
- Where the closet is, and how its doors open.
- Window sill height, and any radiator or heater below it.
- Your bed frame’s outside size, not just the mattress.
Questions people ask
Will a queen bed and a dresser fit in a 10×11 room?
Yes, in one layout: headboard on the door wall, dresser opposite, 24″ and 44″ beside the bed. A closet on a 10-foot wall takes that layout away.
Can I fit a queen and a desk in a 10×11 bedroom?
Only with one side of the bed against the wall. Then a 48″ desk and a dresser fit too, in three layouts.
Is 10×11 a good size for a kid’s room?
Yes. A twin, a 48″ desk and a dresser all fit with both sides of the bed open, in three layouts.
Will a king fit in a 10×11 bedroom?
On its own, with the headboard on the window wall, it gets 26″ on each side. With anything else, one side has to go against the wall.
Try your exact 10×11
Open the Bedroom Solver, set the room to 10×11, then move the door, add a closet or swap the bed. It redraws the layouts and checks every clearance.
Related: 10×10 bedroom layouts · 10×12 bedroom layouts · 11×11 bedroom layouts · Layout Library
Sources
- ADA Standards, 806.2.3 Sleeping areas and 305.3 Clear floor space (U.S. Access Board)
- Minimum dimensions in the IRC (Fine Homebuilding)
- IRC R310 emergency escape openings (Linn County, Iowa)
- Standard door width and height (Milgard)
- Mattress sizes and dimensions (Amerisleep)
- Dresser dimensions (Wayfair)
- Key measurements for a home office (Houzz)